Shot Blasting Machine
  Automatic shot blast machine (LCA3210 )
  LCQ034 II Abrator Head - Impeller Head
  LCA378D Double Hooks Type Abrator / Shot blasting Machine
  LCP300 Steel Pipe shot-blasting machine,LPG Cylinder Cleaning Machine
  LCQ69 H-Steel Abrator _ H-beam shot blasting machine
  Series Abrator head / Blasting Impeller
  LCA326 Shot Blaster - Pedrail type shot blasting machine - Band track Abrator
  LCA3110 Cylinder Type abrator - shot Blasting Machine
  LCA3525 Turn table Abrator / Swing table Abrator - shot-blast machine
  LC3000 Steel Pretreatment Abrator Line - Steel Plate Shot Blasting Machine
  LCA3515 Turn table shot blasting machine,Swing table Abrator
  Cast Steel Shot
  Steel Grit used for abrator / shot blasting machine:
  LCA3113 Cylinder Type Shot Blasting Machine / Drum-type Abrator
  Steel Pretreatment Line - Q6930
  Shot-blasting machine for cleaning Anchor Chain LCA550
  H-Steel Abrator, H-beam shot blasting machine ( LCH0816)
  Automatic Apron Steel Pedrail Abrator (LCA3212), Tumblast Machine
  Hooks Type Abrator / Shot blasting Machine (LCA3780)
  4M Steel Pre-treatment Line - LCL4000
  10T Hook type abrator - shot-blast machine
  30T Trolley Type Shot Blasting Machine _ Pass-through type
  Suspension Hook Type Shot blasting Machine (LCA7150)
  Dust Collect for shot-blasting machine
  H-Steel Abrator, H-beam shot blasting machine ( LCH1220 )
  LCP400F Steel Pipe Polisher, Steel pipe shot blasting machine, abrator
  H-Steel Abrator, H-beam shot blasting machine - LCH1018
  Band track Abrators - Pedrail shot-blast machine ( LCA326 )
  Steel Structure Shot Blasting Machine - LCH2008
  Aluminum Alloy Wheel Hub Shot Blasting Machine - Abrator
  Steel Structure Derusting Machine - LCH1218
  3.5M Ship Steel Pretreatment Line
  LCM1500 Steel Pipe and Plate Shot-blasting Machine, Abrator
  LCM1500A Multi-function Pipe Shot Blasting Machine
  3M Steel Pretreatment Line - LCL3000B
  2.5M Steel Plate Pretreatment Line
  Steel Structure Shot Blasting Machine LCH1515
  Steel Plate Shot Blasting Machine Line - LCA2200
  Shot Blaster - LCA376 Single Hook
  Blast Room
  Blasting Room
  Sand blasting room
  LCP1800 Pipe Shot Blasting Machine
  LCP1500 Pipe ShotBlaster
  LCP2200 Pipe Shot Blast
  LCA3020 Shot-Blasting Machine to Clean Truck Chassis
Maintenance of abrator / Shot blasting maching
Date:2009-3-8    Clicks:[]

Maintenance of shot blasting maching

 

1.When every work finishs, the machine shall be clean.

2.The abration of board in the cleaning room and the orientor,seperator of the blast machine shall be checked regularly, replace them with new ones when the abration is large.

3.Add lubricant regularly with stipulation and often check the flexibility of the machine. the lubricant spots are showed on picture 4 and table 2.

4.Check the transmission parts regularly, and clean the parts, and replace the parts of heavy abration.

5.The power shall be cut off when the machine is inspection and maintainness, to avoid accidents.

6.Boards in the cleaning room shall be replaced regularly according to abrasion. the gap between boards shall be less 1.5mm when replace them according to example 5:

 
Table 2
Serial number
Smooth position
The number of lubrication
Lubrication method
Lubrication period
Types of lubricants
1
Hoist the upper bearing
2
Manual
Once a month
2 # a calcium-based grease
2
ESP electric motor
2
Manual
The total loading capacity
motor smooth requirement to lubricate
3
Chain wheel of the lift
2
Manual
Once a week
Machine oil 40#
4
Hoist reducer
1
Manual
Every 3 months
Machine oil 40#
5
ESP bearing
10
Manual
Once a month
2 # a calcium-based grease
6
Blasting bearing
2
Manual
Once a month
2 # a calcium-based grease
7
Reducer
1
Manual
Every 3 months
Machine oil 40#
8
Chain wheel
2
Manual
Once a week
Machine oil 40#
9
Track-set bearing
4
Manual
Once a month
2 # a calcium-based grease
10
Back shaft
2
Manual
Once a month
2 # a calcium-based grease
11
Expander shaft
2
Manual
Once a month
2 # a calcium-based grease
12
Hoist lower bearing
2
Manual
Once a month
2 # a calcium-based grease
13
Initiative shaft
2
Manual
Once a month
2 # a calcium-based grease
  
Attention: Blasting the upper hoist-tracked the motor drive system The total loading capacity motor smooth requirement to lubricate
   
Home | About Us | Abrator | Solar Water Heater | Technology & Sevice | FAQ/Help | Contact Us | Sign In
Company: L&C Machinery Co.,Ltd.   Address: 4 -32 Cheng Jiao Cun, Dafeng Jiangsu 224100,China
Tel: 0086-515-83817355  Fax: 0086-515-83821283  Zip Code: 224100  Email: james.wang@vip.163.com